SOMFY Home Motion LEVIXO 30 RTS, Installation Instructions Manual

Page: 22 / 76

2
Copyright © 2011 Somfy SAS. All rights reserved.
EN
Levixo 30-50 RTS
Hereby, Somfy declares that this product is in compliance with the essential requirements and other relevant provisions of
Directive 98/37/CEE. A declaration of conformity is available on the website at www.somfy.com/ce (Levixo 50 RTS), usable in
EU, CH and NO.
This compact electromechanical barrier is designed to delimit private areas, car parks, areas where access is reserved for
vehicles and is available in widths of 3 or 5 metres.
The barrier is supplied factory-fitted to be mounted on the left (viewed from inside). If necessary, it is possible to reverse the
opening direction.
The base plate (optional) is used to install the barrier.
It is advisable to install a support bracket (optional) in order to optimise the service life of the barrier.
1. GENEral iNformatioN
2. safEty
2.1. General information
Always read this installation guide and the attached safety instructions before installing this Somfy product. This product must be
installed by a professional motorisation and home automation installer, for whom this guide is intended.
This device is not designed to be used by persons (including children) whose physical, sensory or mental capacity is impaired, or
persons with little experience or knowledge, unless they are under supervision or have received instructions on using the device
by a person responsible for their safety.
The use of any safety components not approved by Somfy remains the sole responsibility of the installer.
Moreover, the installer must comply with current standards and legislation in the country in which the product is being installed,
and inform his customers of the conditions for use and maintenance for the product.
Any use outside the sphere of application specified by Somfy is forbidden. This invalidates the warranty and discharges Somfy of
all liability, as does any failure to comply with the instructions given herein.
This guide describes how to install, commission and operate this product.
2.2. safety instructions
• Somfy refuses to accept any responsibility as regards the safety and correct operation of the lifting barrier if
non-Somfy components are used.
• No modifications may be made to the components of the motorisation system unless expressly authorised by
Somfy.
• Inform the user about the operation of the control systems and how to manually open the barrier in the event
of an emergency.
• Installations which do not comply with the specifications in this manual or improper use of the product may
cause injury or damage the equipment.
• standards in force:
- The constituent components of the machine must comply with the following European Directives: EMC 2004/108/EC, LVD
2006/95/EC, 2006/42/EC and successive modifications. For all countries outside the common market, besides the national
standards in force, it is recommended that the standards listed above are respected in order to guarantee the correct safety
level.
- The installation must comply with the provisions of the following European Directives: EMC 2004/108/EC, LVD 2006/95/
EC, 2006/42/EC and successive modifications.
• installation area:
- Before installation, ensure that the installation location complies with the provisions of the current standards. In particular,
the position in which the motorisation mechanism will be fitted must allow for safe and easy manual release of the barrier.
- Ensure that there are no danger zones (risk of crushing, cutting, trapping) between the barrier and the surrounding fixed
elements caused by the opening movement of the barrier.
- Do not install the product in an explosive environment.