Copyright © 2009-2011 Somfy SAS. All rights reserved.
Easy Sun io
12
EN
B. SUNIS WIREFREE™ IO AND SENSOR BOX IO
1. INTRODUCTION
2. SAFETY
The Sunis WireFree™ io is a wireless sun sensor equipped with io-homecontrol® radio technology.
Powered by batteries, it detects the level of sunlight which is transmitted to the Easy Sun io via a
Sensor Box io.
A Sensor Box io may be linked to up to 10 io sensors. It stores information and sends it to the Easy
Sun io.
$%&'()'#*+,&-.#+/0('&
Somfy accepts no liability in the event of damage to equipment caused by weather conditions not
detected by the sensor.
To prevent damage to the Sunis WireFree™ io and the Sensor Box io:
1) Avoid impacts!
2) Do not drop them!
3) Never submerge them in water.
4) Do not use abrasive products or solvents to clean the products.
The Sunis WireFree™ io operates using a light sensor. Ensure that it is kept clean and
unobstructed by leaves, snow, etc. and check regularly that it is functioning correctly.
Clean the sensor with a dry cloth. Do not use a water jet or high pressure device to
clean it.
Do not open or drill the Sensor Box io.
Do not disconnect the Sensor Box io. Switching off the power to the Sensor Box io
suspends the operation of automatic control devices to which it is paired.
Only use the Sensor Box io indoors, in an area protected from humidity and water
splashes.
3. OPERATION
Once installed and paired to the Easy Sun io, the Sunis WireFree™ io detects the level of sunlight.
The information is sent by the Sensor Box io to the Easy Sun io, which compares the level of sunlight
with a preset sensitivity threshold to control the responses from the applications in the Sun group.
The Sensor Box io sends the following information to the Easy Sun io:
-Sun sensor battery charge level (see the section «
Replacing the batteries in the Sunis
WireFree™ io
»).
-Wind sensor(s) battery charge level (refer to the Eolis WireFree™ io operating guide).
-Disconnection of the Sensor Box io (see the section «
Feedback
»).
-Level of sunlight detected by the Sunis WireFree™ io to control the sun function in automatic
mode (see the section «
Operation in automatic mode
») in part «
A. Easy Sun io
».
Summary of Contents for Easy Sun io
Page 58: ...12...
