Copyright © 2009-2011 Somfy SAS. All rights reserved.
Easy Sun io
7
EN
-To locate and identify the last alert issued, press
and
simultaneously:
-The group of applications and the alert code appear.
-Press
and
simultaneously to return to the standard screen.
For the explanation of the alerts, see the section «
Questions about the Easy Sun io?
»
5.1 Favourite position (“my”)
It is recommended to program, modify or delete the individual favourite position for each application:
[#
either using the application’s local remote control,
[#
or using the Easy Sun io, for groups with only one application.
5.1.1 Programming or modifying the favourite position
1) Set the application to the desired favourite (my) position.
2) Press and hold (approximately 5 seconds) until the
application moves up and down: the desired favourite
position has been programmed.
5.1.2 Deleting the favourite position
1) Press :
-The application is activated and stops in the favourite
position.
2) Press and hold
(approximately 5 seconds) again
until the application moves up and down: the favourite
position has been deleted.
5.2 Group editing
5.2.1 Modifying a group’s composition
The procedure is identical for both adding and deleting a motor or receiver in a group.
-Open the Easy Sun io by lifting the cover to access the setting buttons.
-Select the group using
or
:
-The 5 groups drop down (4 manual groups and 1
automatic group).
-
b50=I?1#2E3#R9JM=#2J#H3#4J65836;
-Press and hold until
and the symbol
or
(list)
is displayed:
-
DE3#8902#?==I5>?25J7#4JA30#M=#?76#6JO7P#520#7M4H39#
and the corresponding symbol are displayed on the
screen.
-Select the motors or receivers to be added or deleted
from the group using
or
:
-Each motor or receiver paired to the Easy Sun io
scrolls on the screen in ascending order: its number
and symbol are displayed, and the corresponding
application moves up and down.
The box on the screen is checked « » if the motor or
receiver is part of the group, and unchecked « » if it is
not part of the group.
-At the end of the list, the total number of motors and
receivers paired to the Easy Sun io and the symbol
« » (all) appears on the screen, all the corresponding
applications move up and down.
The « » (all) box is checked if all the motors and
receivers are part of the group, and unchecked if at
least one motor or receiver is not part of the group.
1
2
my
1
2
my
5. SETTING
Summary of Contents for Easy Sun io
Page 58: ...12...
