Date: 27.09.17
Functional Profile LON RTS Module WM
animeo LON RTS Module 433/447 MHz . Ref. 51318943A
20/44
4.3.3. Setting Output
network output SNVT_setting nvoSetting;
When blinds are controlled by a controller, such as a sunblind controller, the setting
output is used to change the mode and/or the setpoint of the controller. The controller
can be turned ON or OFF and the setpoint can be adjusted.
Valid Range
The Valid Range is given by the interpretation of the “SNVT_setting related to
sunblinds” as shown in the tables it the chapter “Additional Considerations” in the
Sunblind Actuator Profile.
When Transmitted
Whenever the hardware received a corresponding radio message.
Update Rate
There is no maximum update rate. The default minimum update rate is 0 ms. Minimum
update rate is configurable.
Default Service Type
none
4.3.4. Learn Address
network input UNVT_transmitter_addr nviLearnAddr_n;
This input network variable shows the address of the radio transmitter linked actually
to this Functional Block.
It can be used as well to learn a (new) transmitter address if the actual one has been
deleted before by entering Zero. The device listens then for any programming telegram
in the air. As soon as a new radio transmitter message has been received the NV
displays it and stores the address of the transmitter.
It is not possible to link one radio transmitter multiple times to one interface device.
Valid Range
0x000001 ... 0xFFFFFF
