Date: 27.09.17
Functional Profile LON RTS Module WM
animeo LON RTS Module 433/447 MHz . Ref. 51318943A
12/44
Configuration Considerations
None.
When Transmitted
The output variable is transmitted when either of the following conditions occurs:
A request is received by the nviRequest input network variable.
Default Service Type
The default service type is acknowledged.
3.3.3. File Directory
network output SNVT_address nvoFileDirectory;
This output network variable reports the starting address of the configuration-file
directory on a Neuron hosted device. It is used when configuration properties are
implemented within configuration files accessed by ANSI/EIA/CEA-709.1 Read
Memory and Write Memory network-management messages. If an nvoFileDirectory
output network variable is implemented on a device, all files on the device must be
accessible using network management read/write messages. For more details, see
Configuration Properties within the L
ON
M
ARK
Application-Layer Interoperability
Guidelines.
This output network variable must be implemented in the Node Object functional
block if the device supports the L
ON
W
ORKS
FTP with random and sequential access
method. It must not be implemented if the device supports the L
ON
W
ORKS
FTP with
sequential access or the direct memory read/write access methods for data files.
Valid Range
The valid range for the file directory address is any value within the user-data memory
space of a Neuron Chip or Smart Transceiver.
Default Value
The typical default value is FS_NUL.
Configuration Considerations
The Node Object implements the file-request and file-position network variables as
inputs, and the file-status network variable as an output. The device can therefore act
as the Sender or the Receiver in a file transfer, but it cannot act as the Initiator of a file
transfer using these network variables.
