5)
Dokręcić ostatecznie ogranicznik
długim kluczem sześciokątnym,
który pozwoli uzyskać wyższy moment przy dokręcaniu śrub ogra-
nicznika (16 Nm).
A
B
C
D
E
F
6)
Zamontować osłony ograniczników: przykręcić osłonę dolnej części z
otworami (18b), przytrzymując sworzeń podczas dokręcania, następ-
nie przykręcić osłonę górną (18a).
18a
18b
2
1
7)
Zamocować ostatecznie uchwyt skrzydła bramy, używając środkowe-
go otworu mocującego.
7. PODŁĄCZENIA ELEKTRYCZNE
7.1. Montaż przelotek przewodów
Zamontować przelotki na obu napędach.
7.2. Podłączenie napędów
Napęd M1 uruchamia skrzydło, które otwiera się jako pierwsze i zamyka
się jako ostatnie oraz otwiera się, aby zapewnić przejście dla pieszych.
W celu podłączenia napędów do układu elektronicznego należy za-
poznać się ze wskazówkami podanymi w instrukcji montażu Con-
trol Box 3S Axovia.
M1 est à gauche
OU
M1 est à droite
M1 jest z lewej strony
M1 jest z prawej strony
lub
7.3. Podłączenie uziemienia napędu
Podłączyć przewód uziemienia Control Box 3S Axovia (końcówka 3 lub 4)
do złącza uziemienia napędu.
7.4. Zablokowanie ramion
1)
Zamknąć oba skrzydła bramy i zablokować ramiona, popychając je.
2)
Obrócić dźwignię blokowania napędów do położenia zablokowanego .
8. URUCHOMIENIE
W celu uruchomienia urządzenia należy zapoznać się ze wskazówkami
podanymi w instrukcji montażu Control Box 3S Axovia.
7
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
PL
Axovia 220B