2. PRODUCT DESCRIPTION
2.1. Size of motor (in mm)
166.12
175
938.83
309.9
245
30.5
297.5
2.2. Standard installation
2.3. Technical data
Motor power feed outputs
24 Vdc
Power per motor
120 W
Operating temperature
-20°C to +60°C
Protection rating
IP 44
3. PREINSTALLATION CHECKS
3.1. Gate
The gate must be in good condition: ensure that its structure is suitable for
automatic control and that it conforms to the relevant standards.
The gate must remain horizontal throughout its travel, and must open and
close manually with ease.
3.2. Pillars
The pillars are out of plumb so require the use of an intermediate plate.
Furthermore, when one of the motor clamp mounting holes is not resting
on anything or is close to the angle of the pillar or wall, it is essential to
use the intermediate plate (ref. 2400485).
3.3. Reinforcements
If the gate has no reinforcements, fit some metal reinforcement plates
(e.g.: 15x15 cm and 4 cm thick). to secure the brackets to the gate leaves.
3.4. Field of application
The Axovia 220B motorisation is designed to motorise a swing gate for a
single-family home.
1 < L ≤ 2m
H ≤ 2m
P ≤ 200kg
4.
PREPARING AND DRILLING OF PIL
LARS
For the indicated values, the gate leaves and their hinge pins are taken to
be on the same axis.
If the hinge pins are offset, the maximum opening angle values will be
reduced.
1)
Measure dimension A.
2)
Select dimension B in the table according to the required opening an-
gle.
A (mm)
max. α (°)
B (mm)
0
120
205
110
160
105
150
50
100
150
100
95
150
150
90
150
200
90
150
250
90
150
3)
Trace axis
AM
on the pillar copying dimension
B
onto the pillar.
4
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
Axovia 220B
EN