Thymatron
®
System IV Instructions for Use
59
CAUTION
ELECTROMAGNETIC EMISSIONS
Guidance and manufacturer’s declaration – electromagnetic emissions
Thymatron® ECT Systems are intended for use in the electromagnetic environment specified below. The
customer or the user of a Thymatron® System should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment - Guidance
RF emissions
CISPR 11
Group 1
Thymatron® Systems use RF energy only for internal functions.
Therefore, RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
Thymatron® Systems are suitable for use in all establishments other than
domestic and those directly connected to the public low-voltage power
supply network that supplies buildings used for Domestic purposes.
Harmonic emissions,
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
Thymatron® System should not be used adjacent to or stacked with any other equipment. If
adjacent or stacked use is necessary, performance of the Thymatron® System should be observed
to verify normal operation in the configuration in which it will be used.