111710-901-08/07
RSM 400
6 / 23
1.3
Watertightness Disclaimer
This product is designed and tested to fulfill ingress protection requirements according to IP 67. Note that
watertightness is only ensured with the cables properly plugged in and screwed or the protective waterproof
caps fitted to all 2 connector ports.
Before use, please double check to make sure the connectors are not tilted or jammed. You should be able to
smoothly screw the connector coupling nut all the way onto the sockets until the red ring is not visible anymore,
as shown below:
With the protective caps instead of the cables fitted to the sockets, the red rings will still be visible:
Please note that SOMAG AG Jena is not liable for water damages caused by improperly connected plugs or
disconnected plugs.
This disclaimer also includes water damages due to damages of the protective bellow caused by the use of
rough physical force or improper handling. Before use, please check the protective bellow for any tears or
cracks.
SOMAG AG Jena reserves the right to perform a cause analysis of devices damaged by water ingress to de-
termine whether the defect is covered by the warranty.
In case of damage to the bellow or connector ports, do NOT expose the Stabilization Mount to water, dust or
any other harsh environment to prevent critical damage. In this case, please contact SOMAG AG Jena for the
quickest possible repair to guarantee a long service life.
