111710-901-08/07
RSM 400
14 / 23
•
The Mount can only work properly when the continuous torque (M
cont
), which is caused by the
payload and its environmental conditions, is smaller than the continuous torque limit of the
Mount shown in chapter 3.
4.1.4
Dimensions of Fastening Holes / Footprint
•
4x Ø6.7 mm through holes in the RSM 400 base plate to fasten the device.
•
Screws must be longer than 9.5 mm to run through the RSM 400 base plate.
•
All Dimensions METRIC!
Figure 4: Dimensions of fastening holes for the RSM 400
De
vice
Or
ie
nt
at
io
n
De
vice
Or
ie
nt
at
io
n
