69
Figure 56 - Pump settings
Maximum manometric height (m)
Configuration
2-4
3-5
4-6
5-7
Table 6 - Pump settings
Alarms
If the pump detects one or more errors, the LED 1 changes from green to red when
the alarm is activated the yellow LED indicates the type of alarm (see Table 6), if we
have several alarms at the same time, the yellow LED indicates the alarm with higher
priority, the priority sequence is defined on table as follows:
Display
Priority
Alarm
Action
LED 1 red + LED 5 yellow
1
Rotor is blocked
Wait or deblock the
shaft
1 LED red + LED yellow 4
2
Supply voltage too
low
Control the supply
voltage.
1 LED red + LED yellow 3
3
Electrical error
Control the supply
voltage or replace the
pump.
Table 7 - List of alarms
