4
SOLUXTEC USER GUIDE 2021_Version 1/a_ALL RIGHTS RESERVED
3
REGULATION
All modules presented in this document are covered by the following standards:
IEC 61215
IEC 61730
IEC 62804 (PID)
IEC 61701 (SALT MIST)
IEC 62716 (AMMONIA)
EMC and Low Voltage regulation
NOTE: SOLUXTEC is always improving its products. Please contact customer service if a
standard is missing for your project from the above list.
4
TRANSPORTATION AND HANDLING
During transportation and interim storage, following points have to be respected:
Transportation of the modules needs to be done only with SOLUXTEC original
packaging.
Never exceed the maximum number of pallets to be stacked. Only original SOLUXTEC
packaging is allowed for pallet stacking.
When unpacking modules, please wear soft and clean gloves. It is forbidden to use
suction cup to carry the module as it will damage the ento reflective coating for the solar
glass.
It is forbidden to carry/lift the modules from the solar cables or from the junction box or
any conductive elements.
Do not drop module directly on module.
While handling modules be cautious, especially on the corners to not shock them.
While handling the modules never scratch the anodised coating of the frame.
Corrosion may occur and cause mechanical resistance diminution.
It is forbidden to drill holes in the aluminium frames.
It is forbidden to paint the modules or to apply any adhesive on the module’s surface.
Never walk on the module.
