15
SOLUXTEC USER GUIDE 2021_Version 1/a_ALL RIGHTS RESERVED
Connectors need to be kept dry and clean. When wiring connectors together, make
sure that both are from same manufacturer and same reference.
When well connected, you must listen a “click” confirming the right connection.
A bad connection may result into arcs and electrical shock. Arcs may also be the origin
of a fire departure. This point is extremely important.
All framed modules need to be connected together with a grounding solution to the
main equipotential bonding of the project location.
On each module, you can find 4 different location allowing the grounding bonding and
mark with this logo:
It is recommended to use a 10 mm² bonding connector to realize the grounding
between each module. The recommended section to the main equipotential bonding
is 16 mm².
The legal standard from the installation place might be different and need to be follow
in priority.
click
Frame
