- 17 -
4.2.3.
Wired Equivalent Privacy (WEP)
This is about security of the wireless LAN. The wireless LAN provides similar security
to that of the wired LAN using the WEP. To use the WEP, the user must set the key
value. According to the key value, data is encoded in 64 bits or 128 bits for
communication. If the user did not set the WEP, security-related problems may occur.
There are two kinds of infrastructure network for WEP – Open System and Shared Key.
User has to check the type when the network uses WEP.
4.3.
How To configure wireless LAN
Wireless LAN-related parameters can be configured through ezSerialConfig program.
To utilize ezSerialConfig program, apply power with no LAN card inserted and
operate EZL-80c in serial configuration mode.
With this program you can configure IP address and serial port-related parameters as
well as wireless LAN parameters.
Operate EZL-80c in serial configuration mode to utilize ezSerialConfig. Follow the
sequence as described below.
1.
Run ezSerialConfig program in the PC.
2.
With no LAN card inserted, connect EZL-80c and the PC by a serial cable and apply
power.
