- 21 -
[Read] You can see only the ezTCP configuration values if you press this
button after entering the 6-digit hexadecimal number printed on the ezTCP main
body in the MAC ADDRESS box. It is useful when there are too many ezTCPs
attached to the network to search for one from the LIST box.
[Write] This button is used to save the changed value in ezTCP after
modifying the configuration. Make sure not to press this button during operating
ezTCP since ezTCP will automatically be reset right after its environment setup
value is saved. Otherwise, it may cause malfunction.
[Exit] This button is used to close ezConfig. You can also close it by pressing
ESC key on the keyboard.
[Change PWD] ezTCP provides User Authentication function to prevent an
unwanted person from modifying the configuration. The authentication process
is performed through the password string verification. When entering or
changing the password strings, you can use this button. Changing the ezTCP
configuration details if a password has been entered requires the proper password
to be entered in the PASSWORD field.
[Status] This button is used to read a dynamic variable value during operating
ezTCP. Pressing this button will display a new window, where the time-elapsed
after the power is on, the current IP address, and the data throughput of the serial
port are indicated. Double-clicking each item on the MAC ADDRESS LIST will
carry out the same function.
ezConfig can be used to change the IP address related items, the serial port setup value,
the serial port operation mode, and how to setup ezTCP
The following example shows how to read and change ezTCP‟s basic functions. Try