Sollae Systems EZL-300W Lite User Manual Download Page 3

Page: 3 / 42

- 3 -

3.2.

Setting the IP Address and Environment Values······················································- 17 -

3.2.1.

ezConfig····················································································································- 18 -

3.2.2.

AT Command············································································································- 22 -

3.2.3.

Setting the IP Address Using the ARP·······································································- 22 -

3.2.4.

Setting IP Address-related Items through the DHCP Server ······································- 23 -

OPERATION MODE ····································································- 24 -

4.1.

Overview and How To Enter Each Mode··································································- 24 -

4.1.1.

Overview···················································································································- 24 -

4.1.2.

How To Enter Each Mode ·························································································- 24 -

4.2.

Serial Configuration Mode and ISP Mode································································- 26 -

4.2.1.

Serial Configuration Mode ························································································- 26 -

4.2.2.

ISP Mode ··················································································································- 26 -

4.3.

Normal Communication Mode···················································································- 26 -

NORMAL COMMUNICATION MODES ·······································- 28 -

5.1.

T2S (TCP to Serial)······································································································- 28 -

5.2.

ATC (AT Command)····································································································- 30 -

5.3.

COD(Connect On Demand)························································································- 32 -

5.4.

U2S (UDP to Serial) ·····································································································- 34 -

ATC MODE ··················································································- 36 -

6.1.

Overview ·······················································································································- 36 -

6.1.1.

AT command format··································································································- 36 -

6.2.

Basic AT Commands····································································································- 36 -

6.3.

Extended AT commands······························································································- 37 -

6.4.

Online State and Online Command State ·································································- 37 -

6.4.1.

How to switch to online command state from online state ·········································- 38 -

6.4.2.

How to switch to online command state ····································································- 38 -

Summary of Contents for EZL-300W Lite











































Search results

Summary of Contents for EZL-300W Lite

Reviews:

Related manuals for EZL-300W Lite

Brands by name

Popular brands

Sollae Systems EZL-300W Lite, User Manual

Search results

Summary of Contents for EZL-300W Lite

Reviews:

Related manuals for EZL-300W Lite

Brands by name

Popular brands