- 23 -
rtos:~>arp -s a.b.c.d 00:30:f9:00:00:01
☜
Change the table.
rtos:~>arp
☜
Check changes.
Address HWtype HWaddress FLags Mask Iface
a.b.c.d ether 00:30:f9:00:00:01 CM eth0
rtos:~>ping a.b.c.d
☜
pinging to ezTCP
3.2.4.
Setting IP Address-related Items through the DHCP Server
Under environment with a network operating a DHCP server, DHCP protocol allows the
user to automatically set the IP address, subnet mask, gateway, and name server of
ezTCP. Using DHCP automatic setup function requires the user to check [DHCP] item
on ezConfig. Note that the user may have to check [ARP] item according to the type of
DHCP servers.
※ When setting the IP address through the DHCP server, the IP
address is dynamically allocated. Therefore, the user cannot use T2S
and U2S mode.
