- 12 -
ezTCP by Sollae Systems, ezTCP attempts making a connection with the AP that
replies first. Once ezTCP is connected with the AP, the link LED is turned on and then a
communication through the wireless LAN is possible.
※
It is possible that ezTCP connect other AP because SSID is not set. In this case,
you should set SSID to ezTCP via ezSerialConfig
2.2.4.
Configuring ezTCP
Use ezConfig (the ezTCP configuration program) and change the configuration
of ezTCP as follows:
Run ezConfig, and click on [PROBE] button on the ezConfig window. Then, the
ezConfig will search for ezTCPs.
Once the ezTCP(s) is(are) found, the MAC address (hardware address) indicated at the
bottom of the ezTCP case will be displayed in the [MAC ADDRESS LIST] window.
Select the corresponding MAC address, and change the [MUX TYPE] into
[T2S(0)]. Then, enter 1470 in the [LOCAL PORT] field and click on [WRITE] button
to save the setup values.
