- 22 -
z
Configure variables and press [Write] button.
3.3.
AT command
In ATC mode, the user can set environment variables through the serial port using AT
command.
)
For more information, See “6. ATC Mode”.
3.4.
Setting IP Address-related Items by DHCP
Under environment with a network operating a DHCP server, DHCP protocol allows
the user to automatically set the IP address, subnet mask, gateway, and name server of
ezTCP. Using DHCP automatic setup function requires the user to check [DHCP] item
on ezConfig. Note that the user may have to check [ARP] item according to the type of
DHCP servers.
3.5.
Setting IP Address-related Items by PPPoE
PPPoE is used in most ADSL and VDSL. To use PPPoE function, PPPoE function should be
enabled and PPPoE ID and PPPoE password should be configured. The local IP address of
EZL-200L is assigned automatically in PPPoE environment.
√
Some ADSL or VDSL modem use DHCP. Please contact your ISP (Internet Service
Provider).
