- 19 -
has been entered requires the proper password to be entered in the PASSWORD field.
√
If you forget the password, erase or reenter in ISP Mode.
This button is used to read a dynamic status during operating ezTCP.
Pressing this button will display a new window, where the time-elapsed after the power
is on, the current IP address, and the data throughput of the serial port are indicated.
Double-clicking each item on the [Search List] will carry out the same function.
3.2.2.
Example configuration of ezConfig (LOCAL)
ezConfig can be used to change the IP address related items, the serial port setup value,
the serial port operation mode. This section describes these functions briefly. For more
information, see the following sections.
The following example shows how to read and change ezTCP's basic functions. Try
changing ezTCP setup value according to the following sequence
z
When the ezTCP power is turned on and the LAN cable is connected correctly,
pressing [Search] or [Read] button will display the following window:
z
If a network-attached ezTCP is detected, the following message will be
displayed. If a message pops up indicating that there is no response from ezTCP,
check that the power is turned on and the cable is connected correctly, then try
pressing [Search] or [Read] button.
√
It is impossible to use ezConfig, if EZCFG check box is disabled. This function can be
