- 16 -
z
Interval
When EZL-200L operates as UDP like U2S, it transmits data in blocks by gathering data
for the time set to this item (unit: 10ms)
z
ezConfig
You can use ezConfig utility only this item is enabled.
(If this item is not enabled, you cannot set EZL-200L using ezConfig. Therefore, it is
recommended to enable this all the times.)
To enable ezConfig, set this item in ISP mode.
z
Remote Search
If this item is set, EZL-200L in other network can be configured by ezConfig. Remote
Search function is performed in the [REMOTE] tab.
z
Password
Sets a password for configuring with ezConfig. If user forgot the password, the user can
delete the password in ISP mode.
z
ARP
When this item is selected, EZL-200L uses the destination IP address of the first packet
coming to its MAC address as its own IP address temporarily. This item should be set in
DHCP environment if required.
z
DHCP
Set to receive an IP address as DHCP.
z
PPPoE
Set to receive an IP address as PPPoE.
z
PPPoE ID & Password
Sets ID and password used for PPPoE.
EZL-200L uses maximum 32 byte for saving an ID and 8 bytes for a password.
z
Comment
Stores maximum 32 byte user comment on the product. This item helps the user
distinguish each EZL-200L more easily.
