- 18 -
LOCAL
REMOTE
communication
UDP broadcast
UDP unicast (port: 50005)
search
With MAC address
with IP address
location
In the same network with EZL-
200L
Can be used in a different
network
The functions of ezConfig’s buttons are followed:
This button is used to search for all of the network-attached ezTCPs.
The search results will be displayed on the [Search List] box and you can select an item
using a mouse or cursor as required. The value displayed on the box indicates the MAC
ADDRESS of each ezTCP. The selected setup value of ezTCP will be displayed on the
right side.
[LOCAL]tab:.
You can see only the ezTCP configuration values if you press this button after entering
the 6-digit hexadecimal number printed on the ezTCP main body in the MAC
ADDRESS box. It is useful when there are too many ezTCPs attached to the network to
search for one from the LIST box.
[REMOTE] tab:
Reading environmental variables with the IP address.
This button is used to save the changed value in ezTCP after modifying
the configuration. Make sure not to press this button during operating ezTCP since
ezTCP will automatically be reset right after its environment setup value is saved.
Otherwise, it may cause malfunction.
Terminating ezConfig.
ezTCP provides User Authentication function to prevent an unwanted
person from modifying the configuration. The authentication process is performed
through the password string verification. When entering or changing the password
strings, you can use this button. Changing the ezTCP configuration details if a password
