CSW-M85 User’s Manual Ver. 1.6
Sollae Systems Co., Ltd.
- 37 -
http://www.sollae.co.kr
5.2.2 Examples
A situation that [Event Byte] is set to 0
Figure 5-4 time chart
Table 5-7 states of each point
Points
States
~
Power has not been supplied yet.
①
M85 sends connection request segment right after it boots up.
~
processes of TCP connection
②
The connection has been established.
~
data communication on both sides
Look at the blue arrow. The data “123” from the serial port had sent before establishing a
connection. In this case, the data would not be sent because of the [Event Byte] is set to 0.
