125
124
THE CONTAINER WILL NOT VACUUM
1. Make sure that the extraction hose is firmly connected to the vacuum opening
as well as the container lid and push the connection pieces into the openings as
far as possible.
2. Press down on the lid
or
the hose connection to ensure that the container is
airtight.
3. If the container or the adaptor is visibly damaged, change the container or
adaptor. Make sure that the container lid is tight all around.
4. If fluid leaks from the container during vacuuming, the container and it’s con-
tents should first be cooled in the fridge.
5. Check the functioning of the appliance.
6. Check that the edge of the container and the lid are completely dry and that
there is 3 cm distance between the food and the top edge of the container.
If none of these suggestions apply, please contact Solis or a Solis approved service
station.
THE HEXAGONAL CONTAINER IS NOT MAINTAINING
A VACUUM
1. Check that control dial is at the
“SEAL”
position, before, during and after
vacuuming.
2. Check that the rubber seal is sitting correctly and is undamaged.
THE SQUARE CONTAINER IS NOT MAINTAINING
A VACUUM
Check that the rubber seal is sitting correctly and is undamaged.
ACCESSORIES:
Item-No Item
922.52
922.51
922.50
Vacuum films
2 rolls 15 x 600 cm
2 rolls 20 x 600 cm
2 rolls 30 x 600 cm
922.61
922.64
Vacuum bags
50 bags 20 x 30 cm
50 bags 30 x 40 cm
922.79
Square container
2 piece set
1‘000 ml / 2‘800 ml
with air extraction hose
922.78
Hexagonal container
3 piece set
700 ml / 1‘400 ml / 2‘000 ml
with air extraction hose
*
*
*
*
You can purchase accessories for your vacuum sealer in good stores
or from Solis of Switzerland Ltd.
Phone: 0848 804 884, Fax: 0848 804 890,
email: [email protected], www.solis.ch
(shipping only within Switzerland).
*
food safe
