76
iii. VACuuminG SOliS COntAinERS With liDS
Caution:
Please exclusively use containers from SOLIS with this appliance.
For item numbers and descriptions, please refer to the enclosed order form.
You can find accessories for you vacuum-appliance in good stores or you get them
from SOLIS-Mail AG.
telephone: 0848 804 884, telefax: 0848 804 890, email:
or
www.solis-onlineshop.ch
Only these containers are designed for the vacuum that the SOLIS EasyVac Pro creates.
A. Vacuuming of SOLIS containers with twist-knob
on the lid (fig. A)
– Wash the container in water and clean the lid with a
damp cloth; dry all completely.
– Place the food into the container and leave at least
3 cm room between the food and the top edge of
the container (see fig.
B
). Clean the top edge of the
container again and the underside of the lid and the
seal of the container lid, then place the container lid
on the container. Turn the control dial on the lid to
the
“SEAL”
position (see fig.
A
).
– Take the
air extraction hose
π
and insert the thicker
end of it into the
air extraction opening
≥
of the
appliance and the other end into the opening of the
twist-knob on the lid (see fig.
D+C
).
– Press the
Canister Switch
±
button (see fig.
D
), the
vacuum process begins. To make sure that no air
can enter between the container and the lid, press
down on the lid with your hand during vacuuming.
The appliance switches off automatically once the
required vacuum has been reached.
– Gently pull out the air extraction hose from the lid.
– To open the lid of the container, turn the control dial
to the
“OPEN”
position. You will hear a slight hissing
sound as the air enters the container again. This hiss
guarantees that there was an air vacuum in the con-
tainer.
A
B
C
D
