About this manual
All rights reserved. All rights reserved. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without prior written permission of Solidyne.
All mentioned trademarks belong to their respective owners and are
used for reference only.
What's in the box?
1 Solidyne hybrids model HL202/203-VQ according to
correspond..
1 power cable
2 supports “L” for rack montage.
1 link cable (to link units)
2 RJ-11 telephonic wires
4 self-adhesive rubber pads
1 Warranty certificate
1 user manual
Please check that all components are okay when you receive
the packaging.
About the montage
Solidyne hybrids HL202 & HL203-VQ are designed to be mounted
into 19" standard racks. Require one unit (1U) of vertical clearance.
They can also be placed on a table, for which the supports are given
for rubber to adhere to the base of the unit.
When mounting the equipment into a rack, always use flat head
screws with washers flexible (plastic, rubber, etc.). Be sure to adjust
the screws lower and then higher to prevent the weight of the unit to
generate a lever arm on the upper corners.
SOLIDYNE
Telephonic Hybrids
Page 5
