Solid State Logic X-Logic, Owner'S Manual

Page: 7 / 58

Page 3
Introduction
1. Introduction
Overview
The Solid State Logic X-Rack unit has been developed from the successful range of XLogic outboard equipment
and provides a flexible solution to those engineers requiring a larger number of processing units in a compact
package.
The additional space provided by the X-Rack allows the processing modules to be vertically orientated,
providing a more familiar interface to users of Solid State Logic’s renowned range of mixing consoles, and makes
it possible to include Solid State Logic’s Total Recall system - the first time this has been available on an analogue
outboard unit.
This Manual
The object of this manual is to provide purchasers of the X-Rack unit with information in the following areas:
• Operation of the unit
• Safety considerations
• Installation requirements
• Electrical connections and cabling
• Connector pin-outs
• Specifications and physical dimensions
This manual is applicable to X-Rack units from serial number XRK110 onwards and assumes that the X-Rack unit
is running V1.2/0 or later software. Please refer to Section 4 of this manual for instructions on how to check the
current software version and how to obtain and install a newer version if required.
Warranty
The warranty period for this unit is 12 months from date of purchase.
In Warranty Repairs
In the event of a fault during the warranty period the unit must be returned to your local distributor who will
arrange for it to be shipped to Solid State Logic for repair. All units should be shipped to Solid State Logic in their
original packaging. Solid State Logic cannot be held responsible for any damage caused by shipping units in
other packaging. In such cases Solid State Logic will return the unit in a suitable box, which you will be charged
for. Please do not send manuals, power leads or any other cables – Solid State Logic can not guarantee to return
them to you. Please also note that warranty returns will only be accepted as such if accompanied by a copy of the
receipt or other proof of purchase.
Out of Warranty Repairs
In the event of a fault after the warranty period has expired, return the unit in its original packaging to your local
distributor for shipment to Solid State Logic. You will be charged for the time spent on the repair (at Solid State
Logic's current repair rate) plus the cost of parts and shipping.