manualshive.com logo in svg

Solid State Logic SSL UC1, User Manual, Page: 9 / 45

Share
Download
Solid State Logic SSL UC1 User Manual Download Page 9

 Get-Started

9

SSL UC1 User Guide

Downloading SSL 360°, 4K B, Channel Strip 2 and Bus Compressor 2 Plug-ins

UC1 requires the SSL 360° software to be installed on your computer in order to function. SSL 360° is the brains behind your 
UC1 control surface and is also the place to access the 360° Plug-in Mixer. Once you have connected the UC1 hardware to your 
computer as described on the previous page, please download SSL 360° from the SSL website. Whilst you're on the Downloads 
page, also download the 4K B, Channel Strip 2 and Bus Compressor 2 plug-ins.

1.  Go to 

www.solidstatelogic.com/support/downloads

2.  Select 

UC1

 from Products drop-down list.

3.  Download the SSL 360° software for your Mac or Windows system..

4.  Download 4K B, Channel Strip 2 and Bus Compressor 2 plug-ins for you Mac or Windows system.

Installing SSL 360° Software

Mac

1.  Locate the downloaded SSL 360.dmg on your 

computer.

2.  Double-click to open the .dmg.
3.  Double-click to run the SSL 360.pkg.
4.  Proceed with the installation, following the on-screen 

instructions.

Windows

1.  Locate the downloaded SSL 360.exe on 

your computer.

2.  Double-click to run the SSL 360.exe.
3.  Proceed with the installation, following the 

on-screen instructions.

Summary of Contents for SSL UC1














































Reviews:

No comments