Product Overview & Features
35
SSL UC1 User Guide
Logic Pro
STEP 1:
Go to
Preferences > MIDI
and select the
Inputs
tab. In this list, ensure that
SSL V-MIDI Port 1
is ticked (presuming DAW
1 is being configured to drive the Transport). Versions of Logic preceding 10.5 may not have the 'Inputs' tab available. If so, you
can skip this step, as all MIDI ports are turned on by default.
STEP 2:
Go to the
Control Surfaces > Setup
. Click
New > Install...
from the drop-down list in the top-left of the window. From this
list, choose
Mackie Designs | Mackie Control | Logic Control
and click the
Add
button. Click on the image of the Mackie Control
that has been added to the window and in the device setup options list on the left-hand side, configure the
Output Port
to
SSL
V-MIDI Port 1 Destination
and set the
Input Port
to
SSL V-MIDI Port 1 Source
.
STEP 3:
In SSL 360° on the
CONTROL SETUP
page configure
DAW 1
as
Logic Pro
from the dropdown list and also select
DAW
1 (Logic Pro)
in the
TRANSPORT LINKED TO
list below.
STEP 3 : On the CONTROL SETUP tab, set DAW 1 to Logic Pro in DAW CONFIGURATION and also set
TRANSPORT LINED TO as DAW 1 (Logic Pro).
STEP 1 : Enable SSL V-MIDI Port 1 in Logic Pro.
STEP 2: Add a Mackie Control and configure the Output
and Input Port to SSL V-MIDI Port 1.