Solid State Logic SL 9000 J SERIES Operator'S Manual Download | Manualshive

Page: 310 / 415

background image

Creating a Group

To create a Software Group, press the fader status button of the fader you wish to be
master. You will see a message appear under the Group number on screen indicating
that “

Master of Group is Channel

X

LF/SF

”. The fader’s red LED will come on to

confirm your choice. Should you make a mistake, pressing the status button again will
deselect the fader and the LED will go off. Select another fader status button to make
that fader the master.

Now press the fader status button of the first slave. Its green LED will come on to
confirm that it has been selected as a slave. Repeat the process for further slaves. To
deselect a slave from the group, simply press the status button again.

Note that slaves will be of the type currently selected in the Master/Slave Types menu.
If you want to change a slave to a different type, first deselect it from the group. Now
simply change the type by pressing the front panel’s up/down cursor keys or by
stabbing on one of the other options, then reselect the slave to the group. To select a
sequential range of faders as slaves, simply hold down the fader status button of the
first and press the button on the last. The same procedure can also be used to

deselect

a

range of faders.

Once slaves have been assigned to a master, all slaves must be cleared from that group
before the master can be deselected.

You have now set up your first group – easy, isn’t it! To create additional groups, use
the  front  panel’s  left/right  cursor  keys  to  select  the  next  group  number  you  wish  to
use. The LEDs on the group you have just set up will start flashing to show that those
faders  belong  to  another  group,  and  cannot  be  incorporated  into  a  new  one.  Solid
LEDs  always  show  the  slave  and  master  selections  of  the  current  group.  Flashing
LEDs show the master(s) and slaves of all the other existing groups.

An additional type of group is shown under

Collection Types

, and offers a smarter

version of

Slave Cut Inverted

– called

One of ‘n’ Uncut

(see lower screen opposite).

Note that this is not included under Master/Slave Types as there is no absolute master
in this type of group. Select

One of ‘n’ Uncut

and create your group as normal. If you

now press any Cut within the group, it will uncut that Cut and cut all others. Yay!

The Mix System

5-67

9.8.96

«
...
308
309
310
311
312
...
»

Summary of Contents for SL 9000 J SERIES
































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL 9000 J SERIES

Brand: Bamix Pages: 11

Brand: Calrec Pages: 124

Brand: Fender Pages: 8

Brand: Tascam Pages: 51

Brand: Vongon Pages: 17

CONTORTIONIST II

Brand: Mod Pages: 12

Brand: Skyfood Pages: 24

Brand: Sloan Pages: 6

Brand: American Audio Pages: 22

Brand: Grundig Pages: 120

Brand: Blackstar Pages: 16

Brand: Klarstein Pages: 21

Brand: Engl Pages: 12

Brand: Denon Professional Pages: 8

Brand: Denon Pages: 8

Original Vortex Mixer

Brand: Promixx Pages: 4

Brand: Lithium Grim Pages: 12

Brand: Hermida Audio Technology Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands