manualshive.com logo in svg

Solid State Logic SL 9000 J SERIES, Operator'S Manual

Share
Download
Solid State Logic SL 9000 J SERIES Operator'S Manual Download Page 56

The SL911 Input/Output Module

The I/O module has two independent signal paths. Each path has its own input and
fader.  The  module  automatically  powers  up  in  a  standard  output  routing
configuration determined by the master desk status. The output routing, however, can
be over-ridden locally at any time, to provide extra flexibility of operation. 

The two inputs are the CHANNEL INPUT and the MONITOR input.

The two faders are the LARGE FADER and the SMALL FADER (LF and SF for short).
Each fader has an associated pan control.

The  path  fed  by  the  Channel  Mic/Line  Input  stage  is  designated  the  ‘CHANNEL’
path.  The  path  fed  by  the  Tape/Group  Monitor  Input  is  designated  the  ‘MONITOR‘
path.

The module’s outputs are the main Stereo/LCR bus, the 48-track Routing Matrix at the
top of the module, the four Stereo Subgroup busses A, B, C and D (immediately below
the Multitrack Routing Matrix) and the channel Group Output. 

Either or both faders can feed the main Stereo bus (‘Mix’). 

Either fader can feed the Multitrack Routing Matrix and Stereo Subgroup busses or the
Group Output. 

On  channels  1-48,  the  Group  Output  can  also  be  fed  by  the  multitrack  mix  bus
corresponding to that channel. 

The  Multitrack  and  Stereo  Subgroup  busses  can  also  be  fed  by  any  of  the  Auxiliary
send controls, allowing additional effects sends or cue mixes to be generated. 

EQ, Filters, Dynamics and Aux send controls can be switched into either signal path.

Obviously  there  are  many  possible  permutations  of  signal  routing,  allowing  an
enormous  number  of  creative  possibilities.  This  section  looks  at  each  control  on  the
SL911 module individually, with a brief summary of the routing possibilities. Section 2
describes these in more detail. 

The SL911 Input/Output Module

3-1

8.9.94

Summary of Contents for SL 9000 J SERIES
































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands