Avid S3 + Sigma
Setup of EuCon preference pane for MCU control over the Sigma Remote App is the same for Artist Mix and the Avid S3
(as detailed previously).
• Connect an S3 surface and ensure it is shown in the My Surfaces list in the EuControl Settings App.
Note that an S3 surface always uses DHCP and can not be set to a static IP address.
• Open the Sigma Remote Control App and assign Euphonix MIDI Port 1 to Channels 1-8 and Euphonix MIDI Port 2 to
Channels 9-16. This will require Sigma to reboot.
As soon as the Sigma Remote App is the current open application, the S3 will be controlling Sigma Channels 1 - 16. Just
as with the Artist Mix, when the DAW window becomes the focused application on the computer, the Avid S3 will switch
to control of the DAW instead of Sigma if EuCon control has been enabled in the DAW software.
To lock the S3 to the Sigma Remote application, follow the setup described for Artist Mix (as detailed previously).
PT | Control (iPad app) + Sigma
The Avid iPad app can also be used to control Sigma via a wireless network linked to the host computer. The same
functions as Artist Mix are supported with the exception of Panning and the Mono/Stereo mode.
Once the iPad app is running, PT | Control will be shown in the EuControl Settings Surface Tab.
Page 60