7. Controlling Sigma Mix Busses & Monitoring from
δ
elta plugins
For automating Sigma mix bus levels, or for direct control of your monitor section via the DAW (particularly using a EuCon
surface), install the SSL
δ
elta Control Mix Bus and SSL
δ
elta Control Monitoring plugins.
The
δ
-Monitoring and
δ
-Mix Bus plugins have separate installers; both of which can be found in your SSL account under
My Products
>
AwS Downloads
. Run the installer of your plugin and follow the process described on page 13.
Both
δ
-Monitoring and
δ
-Mix Bus work with the ‘SSL Delta Plugin’ iLok license.
SSL
δ
-Mix Bus Plugin
The
δ
-Mix Bus Plugin remotely controls your Sigma monitoring switches / levels. It is designed to be used alongside the
δ
-Monitoring plugin, and
δ
-Single/
δ
-16 plugin; all channel, mix bus and monitor settings will be stored within each DAW
project for faster recall.
GUI
workstation Setup
1.
Follow the steps outlined in the
Example Setups
for Sigma and your chosen DAW
2. Once the plugin has been installed, insert the
δ
-Mix Bus plugin into any track in your DAW
3. The plugin will connect to Sigma automatically. Set the track automation type to ‘touch’ or ‘latch’ to automate mix bus
levels, and other parameters as desired
Page 62
1
Faders
– click on a fader to change the level of
each mix bus. Double-click to set to 0dB
2
Sums
– indicates the mix bus insert-sum switch
positions. This sums together the pre insert and
post insert signals in a 50/50 split for parallel
processing. Click on switches to toggle
3
Inserts
– indicates the mix bus insert switch
positions. Click on switches to toggle
4
B-to-A
– sums mix B into mix A. Click on switch
to toggle
5
Level indicator
– indicates level of each mix bus
in dB. Brightens up when levels are changed
/automated
1
2
3
4
5