Page 18
Network Connection Configuration – Macintosh
• On your computer go to
System Preferences
and click on the
Network
icon.
• Set
Configure IPv4
to
Manually
then fill in the
IP Address
and
Subnet Mask
boxes with the numbers shown. The IP
address should be in the 192.168.1.X range with a Subnet of 255.255.255.0.
‘X' should be a number between 3 and 254. Make sure that the ‘X’ number is not the same as Sigma’s address, or
any other device on the network.
Network Connection Configuration – windows
• Go to
Network
and go into
Local Area Connection Properties
.
• Open up the option
Internet Protocol version 4 (TCP/IPv4)
.
• Select
Use the following IP address
and then fill in the
IP Address
and
Subnet mask
boxes as shown below.
