Solid Apollo LEDWizard Product Manual Download

Page: 14 / 15

PRODUCT MANUAL

LEDWizard Tablet and Smartphone LED

Control System w/ Optional Remote

SolidApollo.com

™

Tel. 425.582.7533

Toll Free. 866-592-3873

www.SolidApollo.com

[email protected]

page 14

LEDWizard Wi-Fi Control System

page 14

HOW TO PROGRAM THE MASTER RECEIVER:
A.

Press the red power button on the remote.

On the remote, choose which zone will be used for the master and slave lighting (Tap the number, do not hold)

On the receiver, tap the learning button.

On the remote, tap the B+ button to complete the Master receiver pairing. The light red light on the

reciever will blink to confirm the pairing is complete.
(Note: there can only be one Master receiver on each zone.)

HOW TO PROGRAM THE SLAVE RECEIVER:
A.

Press the red power button on the remote.

Choose the same zone the Master receiver was used in (Tap the number, do not hold)

On the receiver, tap the learning button

On the remote, slide your finger clockwise on the color wheel until the red light on the

receiver blinks, this will confirm the pairing is complete.
(Repeat this procedure for each slave receiver in the zone)

The master and slave programming is now complete.

Learning Key Button Location

Remote Button Functionality

Summary of Contents for LEDWizard
















Search results

Summary of Contents for LEDWizard

Reviews:

Related manuals for LEDWizard

Brands by name

Popular brands

Solid Apollo LEDWizard, Product Manual

Search results

Summary of Contents for LEDWizard

Reviews:

Related manuals for LEDWizard

Brands by name

Popular brands