DMX BOSS
W
i-F
i C
on
tr
oller
Page 12
Synchronizing Receivers with Router and Smart Phones or Tablets:
Once the LED lights have been correctly installed and connected to the power supply, the lights are now ready to accept
inputs from the software.
Follow the next easy steps:
1.
Execute the LEDWizard Color Control application on your devise.
2.
Make sure you are connected to the router with the name ID EasyColor.
3.
Once that is done, press the learning button on the white receiver for less than 1 second.
4.
On the EasyColor software on your device press the power button
5.
Select the zone to which you want to assign the receiver by selection or pressing shortly the number that corresponds to
the zone you want to use.
6.
Now move your finger clockwise on the color wheel to until the synchronization is over (5-10 seconds). If done correctly
the light now will respond to the ON/Off Button.
Selecting Colors:
There are 2 ways you can select colors for each zone (Receiver). Follow the following steps:
1. Select a zone number from 1-8 to be controlled and use the color wheel to change the color of that zone. If you want to do this
simultaneously for more than 1 zone, select the corresponding zones by pressing their numbers consecutively. For example if we
want to change the colors of zones 1 to 4 we would press the following number is the zones selector: 1, 2, 3, and 4. After that use
your finger on the color wheel to change the color on the selected zones.
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
...continued on next page
