DMX BOSS
W
i-F
i C
on
tr
oller
Page 10
...continued on next page
2.
Color Wheel:
By sliding your finger around the color wheel color selection can be made. It is also used in the auto program
function discussed later on where you can define color transitions into memory.
3. Connection Status:
Every time you press any of the 11 buttons in the LEDWizard Interface the RED Light will blink in order to
show connection with the Router and receivers.
4.
ON/OFF Button:
Used to turn off or on all zones.
5.
Return to previous program:
Once a program is executed by using button 11, you can easily return to any previous program.
6.
Color Selection:
The three main buttons are Red, Green, and Blue, but many other colors can be selected individually or as a
group to fast access colors and/or fine-tune colors. The W button is used for 2 purposes, 1- To turn ON/OFF the White Channel (If
you are also using single color LED Lights together with the color Changing Lights, and 2- To dim up and down the White color. In
order to dim up/down the white color, you will need to place your finger on top of the W letter and keep it there until the white
channel dims up/down until the desired level is achieved.
1. Software setup: By pressing this button you will be able to configure the Network properties of the connection through the
LEDWizard Router as discussed previously.
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Operating the Wi-Fi Program using Smartphone or Tablet:
This section covers what the controls are and their functions.
