27
5.7
Antenna Alignment
Antennas used for licensed microwave applications have very narrow beamwidth and thus installation
requires precise antenna adjustments to achieve a correct antenna alignment.
The ODU is equipped with an RSSI port. The voltage at this connector is proportional to the RSSI. The
alignment process is intended to achieve the highest voltage signal. The following diagram shows typical
values seen by the ODU.
Voltage Reading
Signal Strength
0.1 V
-90 dBm
0.8 V
-80 dBm
1.4 V
-70 dBm
2 V
-60 dBm
2.6 V
-50 dBm
3.2 V
-40 dBm
3.8 V
-30 dBm
4.5 V
-20 dBm
Table 5-2: typical voltage reading vs. Rx signal.
Summary of Contents for SKYWAY-LM Series
