Sole Fitness LCB Owner'S Manual Download

Page: 23 / 26

LCB

FITNESS BIKE

HEART RATE CONTROL PROGRAM OPERATION

Both programs operate the same, the only difference is that

HR1

is set to 60% and

HR2

is set to

80% of the maximum heart rate. They both are programmed the same way.

To start an

program follow the instructions below or just select the

HR1

HR2

program,

then the

Enter

button and follow the directions in the message window.

1. Press the

HR1

HR2

key then press the

Enter

key.

2. The message window will ask you to enter your

Age

. You may enter your

Age

, using the

and

Down

keys, then press the

Enter

key to accept the new number and proceed on

to the next screen.

3. You are now asked to enter your

Weight

. You may adjust the

Weight

number using the

and

Down

keys, then press

Enter

to continue.

4. Next is

Time

. You may adjust the

Time

and press

Enter

to continue.

5. Now you are asked to adjust your

Target Heart Rate

. This is the heart rate level you will

strive to reach and maintain during the program. Adjust the level and then press

Enter

NOTE

: The heart rate that appears is based on the % you accepted in Step 1. If you change this number

it will either increase or decrease the % from Step 1.

6. Now you are finished editing the settings and can begin your workout by pressing the

Start

key. You can also go back and modify your settings by pressing the

Enter

key.

NOTE

: At any time during the editing of Data you can press the Stop key to go back one level, or screen.

7. If you want to increase or decrease the workload at any time during the program press

the

Down

key. This will allow you to change your target heart rate at any time

during the program.

8. During the

HR1

HR2

programs you will be able to scroll through the data in the

message window by pressing the adjacent

Display

key.

9. When the program ends you may press

Start

to begin the same program again or Stop to

exit the program or you can save the program you just completed as a

Custom Program

by pressing the

Custom

key and following the instructions in the message window.

Summary of Contents for LCB



























Search results

Summary of Contents for LCB

Reviews:

Related manuals for LCB

Brands by name

Popular brands

Sole Fitness LCB, Owner'S Manual

Search results

Summary of Contents for LCB

Reviews:

Related manuals for LCB

Brands by name

Popular brands