Customer Service 1-888-707-1880
Email: [email protected]
9
#71.
3/8" ×1-1/2"_
Carriage Bolt (1 pc)
#72.
Ø 3/8" × Ø 30 × 2T_
Flat Washer (1 pc)
#104.
5/16" × 5/8"_
Button Head Socket Bolt
(2 pc)
#33
. Ø 5/16" × Ø 18 ×
1.5T_Flat Washer (2 pcs)
#35.
Ø 5/16" × 1.5T_
Spring Washer (2 pcs)
2
STEP
HARDWARE STEP 2
1. Install the Handlebar (3) on the Console Mast (2) Gather the
Handpulse Assembly (97) through the Console Mast and
Console mounting plate and use the Combination M5 Allen
Wrench & Phillips Head Screwdriver (43) to tighten 2pcs
of
5/16" × 5/8"_Button Head Socket Bolt (104), 2pcs of
Ø 5/16" ×
1.5T_Spring Washer (35) and 2pcs of Ø 5/16" ×
Ø 18 ×
1.5T_Flat Washer (33) to the Console Mast (2).
2. Take apart (three M8 x 7T nuts and three Ø 8 × Ø 20 × 1.5T flat
washers (A) under the Seat (20). Locate the sliding seat
mount (7)
under the seat and use the 13mm/15mm open end
wrench (79)
to tighten three M8 x 7T nuts and three Ø 8 × Ø 20
×
1.5T washers. (A) attached under the seat).
3. Use 1pcs of 3/8" × 1-1/2" Carriage Bolt (71) to go Through the
Seat (20) and the Inner Slide (6) then tighten with 1pcs of
Ø 3/8" × Ø 30 × 2T Flat Washers (72) and the Seat knob (52).
Summary of Contents for B54
Page 1: ...Customer Service 1 888 707 1880 Email customerservice dyaco ca 1 ...
Page 26: ...Customer Service 1 888 707 1880 Email customerservice dyaco ca 26 EXPLODED VIEW DIAGRAM ...
Page 31: ...Customer Service 1 888 707 1880 Email customerservice dyaco ca 31 ...
Page 32: ...Customer Service 1 888 707 1880 Email customerservice dyaco ca 32 ...