Customer service: 1-888-707-1880
Dyaco Canada Inc 2021
Email: [email protected]
8
SFT160
ASSEMBLY INSTRUCTIONS
Assembly of the equipment takes professional installers approximately 2 hours. If
this is the first time you have assembled this type of equipment, plan to spend
more time. It is highly recommended to use professional installers to assemble
the equipment. You may find it quicker, safer, easier to assemble with the
assistance of another person as some components of the unit are large and
heavy.
It is important that you assemble your product in a clean, clear, uncluttered area.
This will enable you to move around the product while fitting components and reduce the
possibility of injury during assembly. Note: As with any assembled part, proper alignment
is critical. While tightening the fasteners, be sure to leave room for adjustments. Do not
fully tighten the fasteners until instructed to do so. Be careful to assemble the components
in the sequence presented in this manual.
SFT160 STEP ONE
Attach the Bookshelves (No.40) onto the Connecting Frame (No. 4). Secure with: 2 Socket Head
Cap Screw M8 x 15 (No. 43), 2 Washer
φ
9 x
φ
16 x 1.6 (No. 50).
Connect the Right Stand (No. 2) to the Left Stand (No. 1) using the Connecting Frame (No. 3) and
the Connecting Frame (No. 4). Secure with: 8 Hex Bolts M10 x 25 (No. 56), 8
Spring Washers φ
10 (No. 46),8
Washers φ11 x φ20 x 2 (No.
49). Note: Hand Tighten the Bolts.
