Customer service: 1-888-707-1880
Dyaco Canada Inc 2021
Email: [email protected]
10
SFT160 STEP THREE
Slide the 2 Guide Bars (No. 12) into the holes at the base. Allow the Guide Bars to lean inward
together toward the centre of the machine - this will allow you to slide on the necessary parts during
this assembly step more easily. When installing the Guide Bars (No. 12), ensure the end with the
Rubber Stopper (No. 14) is situated closest to the floor.
Slide the 2 Rubber Pads (No. 24) onto the 2 Guide Bars (No. 12). They will support the weight
stack.
Slide 15 Weight Plates (No. 30) onto the 2 Guide Bars (No. 12), then slide on the Top Plate (No.
31). The hole on the front of the Top Plate (No. 31) is pointed towards the centre of the machine.
Tilt the 2 Guide Bars (No. 12) back to a vertical position (pointing straight up) and secure the 2
Guide Bars (No. 12) to the frame at the top using: 2 Mount Sleeves (No. 23
), 2 Washers φ9 x φ16
x 1.6 (No. 50
), 2 Spring Washers φ8 (No.
47), 2
Socket Head Cap Screw
M8 x 30 (No. 42). The
pieces come preassembled on the Left and Right Stands (No. 01, 02).
First, attach the Selector Pin with Coil (No. 32) to the Top Plate (No. 31). Then attach the Pulley
Connecting Frame (No. 13) to the Top Plate (No. 31).
Repeat for the Right Stand (No.2).
Note: Wrench tighten bolts.
