Customer service: 1-888-707-1880
Dyaco Canada Inc 2020
Email: [email protected]
6
SFI100
ASSEMBLY INSTRUCTIONS
To avoid possible damage to this
SFI100
Flat Incline Bench, please follow these
assembly steps in the correct order. Be sure to read your Assembly/Owner’s Guide
before using your new
SFI100
Flat Incline Bench.
Please use the various lists in this manual to account for all parts included in the
assembly. If replacement parts are needed, use the part number and the description
from the lists. Use only our replacements when servicing. Failure to do so will void your
warranty and could result in personal injury
After assembly, check all operations for ease of use. If any problems are experienced,
first recheck the assembly instructions for possible errors made. If more help is needed,
call your authorized dealer. Be sure to have your serial number ready.
NOTE: During assembly, it is recommended to ensure that all bolts are in place and partially
threaded before completely tightening any one bolt.
UNPACKING
Cut the straps, then pull the staples away from the bottom half and lift the top half of the carton off of
the bottom. The hardware is located in the holes of the associated tubes/brackets
SFI100
TOOLS REQUIRED / HARDWARE GUIDE
RATCHET
WRENCH
AND SOCKET
ADJUSTABLE
WRENCH
RUBBER MALLET
HEX KEY
WRENCH SET
