TROUBLE SHOOTING
Problem
Cause
Correction
Monitor does not display
Batteries not installed
Insert batteries
No speed or distance displays on
the monitor
Connected wire doesn
’t connect
with extension wire of computer
or sensor wire
Securely plug connected wire
into extension wire of computer
and sensor wire
Connected wire or sensor wire
damaged
Replace connected wire or
sensor wire
Computer not working properly
Replace computer
Grinding
Idler pulley defective
Replace idler pulley
Fan wheel defective
Replace fan wheel
Squealing
Poly V-belt slipping
Adjust poly v-belt
Crank bearing defective
Replace crank bearing
Idler wheel bearing defective
Replace idler wheel bearing
Fan wheel bearing defective
Replace fan wheel bearing
MAINTENANCE :
The safety and integrity designed into the
air bike
can only be maintained when the
air bike
is
regularly examined for damage and wear. Special attention should be given to the following:
1.
Pedaling slowly and verify that the Air Resistance System provides tension. The Air Resistance
System
should provide many years of use.
2.
Use a wrench to verify that the pedals are tightened securely. If tightening is required,
remember that the left pedal has left hand threads and is tightened by turning
counterclockwise.
3.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and
bolts.
Tighten loose nuts and bolts.
4.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.
Worn or damaged components shall be replaced immediately or the
air bike
removed from
service until repair is made.
6.
Keep your
air bike
clean by wiping it off with an absorbent cloth after use.
-
2
1
-
