ENG - 4
03917700.ENG rev. 0
Before starting work the operator must be aware of the position and operation of all commands and the characteristics of the
engine; make a daily check of the safety devices on the engine. Disabling or tampering with the safety devices on the engine is
strictly prohibited. Do not attempt to perform maintenance work
adjustments or reset tings on moving parts on the engine; before
performing any of the above operations disconnect the electrical supply to ensure that no other persons can start the engine up
in the meantime.
Do not alter any parts of the engine (for example connections, holes, finishes, etc.) to adapt it to the installation of extra
equipment or for any other reason; THE RESPONSIBILITY FOR ANY TYPE OFINTERVENTION NOT EXPRESSLY
AUTHORISEDIN WRITING BY SOLÉ S.A. IS BORNEEXCLUSIVELY BY THE PERSON OR PERSONSWHO CARRY OUT
SUCH WORK.
SOLÉ S.A. DECLARES THAT THE ENGINECHARACTERISTICS ARE COMMENSURATEWITH THE PARAMETERS
PERMITED BYESTABLISHED LAW REGULATIONS REGARDINGTHE EMISSION OF:
-AIRBONE NOISE
-POLLUTING EXHAUST GAS
WHEN USING THE MOTOR IN A CLOSEDENVIRONMENT THE EXHAUST FUMES MUST BECONVEYED OUTSIDE..
1.3.1 INFORMATION REGARDING RESIDUALRISKS
The engine must be used in compliance with the manufacturer’s prescriptions (technical specifications, safety regulations, etc.).
Any modifications you make be previously authorized by the Manufacturer. If you use the engine beyond its application limits and
alter in any way the characteristics that are the responsibility of SOLÉ S.A., such use shall be considered improper and SOLÉ
S.A. declines all liability for the consequences (see notes regarding intended use in General Safety Notices 1.3).
DO NOT TAMPER WITH ORMODIFY ANY MECHANICALOR ELECTRICALCOMPONENTS OF THEENGINE
WITHOUT PIORWRITTEN AUTHORISATIONFROM THEMANUFACTURER
1.3.2 SAFETY REGULATIONS
IT’S STRICTLY PROHIBITEDTO PERFORM MAINTENANCEWORK WHILE THERE AREENGINE PARTS
MOVING.
IT’S STRICTLY PROHIBITEDTO REMOVE OR TAMPERWITH THE SAFETYDEVICES
WHEN THE ENGINE ISRUNNING IT IS STRICTLYPROHIBITED TO TOUCHANY PARTS OF IT
ALWAYS PROTECT THEHANDS WITH SAFETYGLOVES AND HEATRESISTANT CLOTHINGWHEN
WORKING ON A HOTENGINE
PROTECT THERESPIRATORY PASSAGESWHEN WORKING IN THEVICINITY OF ENGINEEXHAUST GAS
Summary of Contents for MINI 17
