solasfires.com
47
GAS CONVERSION
SÓLAS appliances are shipped from the factory ready for Natural Gas and are field convertible to Propane when a SÓLAS
gas conversion kit is used. Gas conversions must be performed by a qualified service technician, or licensed gas fitter
where local code requires. Installation must be performed by a licensed service technician, if not the warranty is void.
SÓLAS Gas Fireplaces are approved for installation at elevations up to 2000 feet in the U.S. and 1370 meters (4500 feet)
in Canada Without change. If your installation is at an elevation greater than those noted, consult with the local authority
having jurisdiction for gas product installations to determine their specific requirements for high altitude installations.
1. The burner is retained by (2) #10 sheet metal screws at
the rear of the burner at the far left and right sides, see
white arrows in the image below. Remove these (2) #10
sheet metal screws using a 5/16” extended nut driver
and ratchet.
2. Slide the burner to the right side of the firebox, lift the
right side of the burner first to disengage the burner
from the burner orifice.
3. Using a 9/16” deep socket, remove and replace the
burner orifice with the correct orifice provided in the
conversion kit.
PART #
DESCRIPTION
SÓLAS CONVERSION KIT CONTENTS
SL26-LPC
TWENTY6 LP CONVERSION KIT
#27 PILOT ORIFICE
#53 LP BURNER ORIFICE – 1PC
#8 SCREW – 1PC
