Fastening on short sides
In addition, this fastening mode requires a central,
round or linear support on the lower frame side
(central support). The maximum pressure load to
the solar module for the installation method is
2,400 N/m².
Horizontal installation for modules without additional feature “crossrail”
areas approved for fastening
substructure
16
0
mm
16
0
mm
16
0
mm
16
0
mm
200 mm
200 mm
Fastening on long sides
The maximum pressure load to the solar module
for the installation method is 3,500 N/m².
It is not permitted to use SOLARWATT solar modules as overhead glazing. For roof instal-
lation, these solar modules may only be installed over a fi re-resistant roof covering.
NOTE
areas approved for fastening
substructure
INSERTION SYSTEM
Fixed in place by inserting in a supporting frame
Vertical installation
The maximum pressure load to the solar mo-
dule for the installation method is 2,400 N/m².
3
PAGE 24 | SUBJECT TO CHANGE | © 2017 SOLARWATT GMBH | AZ-TM-PMS-0673 | REV 012 | STATUS: 08/2017
