Operation manual of solar water controller SR530C8/SR530C8Q
---------------------------------------------------------------------------------------------------------------------------------------------------
- 23 -
Setup steps:
To access main menu TEMP, then select submenu REC, “REC OFF” displays on
screen, default set is off.
►Press “SET” button, parameter “OFF” blinks
on screen
►Repress “SET” button to activate or
deactivate this function, after function activated;
factory set is “REC ON”
► Press “ESC” button to exit the menu or wait for 20 seconds to exit automatically,
parameters are saved automatically.
REC signal displays on screen, it indicates that this function is in activated.
4.5.7 C- F Celsius and Fahrenheit temperature transferring
Setup
steps
:
To access main menu TEMP, then select submenu C-F, “C
＿
F
℃
” displays on screen.
►Press “SET” button, parameter “
℃
” blinks on the screen.
►Press “+” button, to select between Celsius and Fahrenheit temperature, factory set
is
℃
►Press “ESC” button to exit menu or wait for 20 seconds to exit automatically,
parameters are saved automatically.
4.6 FUN Auxiliary function
The auxiliary function of this controller can be set under “FUN” submenu; it is possible
to activate several auxiliary functions at the same time.
Note:
Sometimes, your selected function needs an extra signal input to connect temperature
sensor or an extra output to connect pump or electromagnetic valve. in “FUN “submenu,
some functions are deactivated. Hence, for different system, activated or deactivated
status for following auxiliary functions in submenu is also different.
Example to explain:
If you set thermal energy measuring parameter (OHQM) is off, that means this function
