Operator and Maintenance Manual for PRO-Verter RMK LAN
January 2020
|
Solar Stik
®
, Inc.
18
|
Using the LED Indicators to Determine the RMK’s Status
TROUBLESHOOTING PROCEDURES
There is a bi-color LED indicator on the side of the RMK (next to the Ethernet port) to indicate
the RMK’s status. When the device is first powered up, the LED blinks red and green while going
through a self-test. Once the self-test is complete, use the table below and the LED indicator to
determine the RMK’s operating status.
If the RMK device does not function correctly, use the tables below to help find a solution.
Figure 20. Functions of LEDs below the Ethernet port
Normal operation is amber or green for the Link LED and periodic flashing of the
Activity LED.
Link
Activity
Ethernet port
first connected
Table 2. RMK LED Indicator Guide
Table 3. Link and Activity LED Meanings
8
© 2011 Magnum Energy, Inc.
4.0 Using LED Indicators to Determine MagWeb’s Status
4.2 MagWeb Wired Ethernet LED Status
4.2.1 LEDs Below the Ethernet Port
Normal operation is amber or green for the Link LED and periodic fl ashing of
the Activity LED.
Note:
Refer to Figure 4-1 (Back View) to determine the positions of the
Activity and Link bi-color LEDs within the MagWeb’s Ethernet port.
Table 4-2, Functions of LEDs Below the Ethernet Port
Link LED
Activity LED
Color
Meaning
Color
Meaning
Off
No Link
Off
No Activity
Amber
10 Mbps
Amber
Half Duplex¹
Green
100 Mbps
Green
Full Duplex²
Note 1 - Data transfers between Magnum’s servers and the MagWeb system
can only transmit in one direction at a time (not simultaneously).
Note 2 - Data transfers between Magnum’s servers and the MagWeb system
can transmit in both directions at the same time (simultaneously).
