Operator and Maintenance Manual for PRO-Verter RMK LAN
January 2020
|
Solar Stik
®
, Inc.
14
|
6. Click the radio button in front of “Use the following IP address:” if it is not already selected.
If using the default IP address for the RMK, which is 192.168.1.200, set the PC IP address to
192.168.1.xxx.
Note:
The last 3 digits can be any number between 1 and 254, with the exception
of numbers already associated with other devices (including the RMK) on the network. The one in
Figure 16 is set to 240.
Set the other address per Figure 16. When finished, click OK or Close in the three (3) windows for
the changes to take effect.
Figure 16. Internet Protocol Version 4 Properties window
5. In the Ethernet Status window, click the Properties button. In the Ethernet Properties window,
click the “Internet Protocol Version 4 (TCP/IPv4)” box. If the box was already checked, click to
uncheck the box and then click again to check the box so the Properties button becomes active.
Then click the Properties button.
Figure 15. Ethernet Status and Ethernet Properties windows
Click
1. Click
2. Click
when
button
is active
